Don't Settle for Less. Demand the Best. Demand Bassett Quality.
Your Boat Header & Boat Racing Parts Specialist Bassett Racing Performance Systems 1380 N. McCan Street, Anaheim, California 92806 Phone 800-345-5824 & 714-630-7999 Fax 714-630-3121 Email mail@bassettracing.com
HOME PRODUCTS PHOTOS of PRODUCTS FAQ
GET A BROCHURE CONTACT US NEW PRODUCTS! |
* 15 Degree Upswept Racing Boat Header * Water Jacketed Log Manifold & Risers * Stage 1 Silencer Muffler * Stage 1 Silencer Muffler Tip * Block Hugger Hot Rod Car Header
Get your Boat to the Finish Line First.
Bassett Racing's NEW 15 Degree Upswept Racing Water Injected Boat Header with Lay Back Design. Easy Access to Valve Cover Bolts for those Quick Valve Adjustments in between heats. 32" Wide to inside of Collectors to clear Double Stack Fuel Tanks. Primaries are 2 1/4" with a 4" Collector. Jet or V-Drive application. Triple Plate Chrome, High Luster Ceramic Coating or Raw Steel Finish. Crank Case Ventilators, O2 Sensors, Shorter or Longer Collector Lengths and Pirometer Fittings can be installed for an additional charge. Put a set of these new 15 Degree Upswept Headers on and get your boat to the Finish Line First.
Design Highlights: Triple Plate Chrome Finish 15 Degree Angle Upswept Ease of Access to Valve Covers 2 1/4" Primaries 4" Collector 3/8" Thick Flange Mandrel Bent Heli-Arc Welded
15 Degree Upswept Racing Boat Header
A First In the World!
Bassett has redefined the Log Manifold & Riser. Introducing the Bassett Water Jacketed Log Manifold & Riser. A first in the world. Finally, a Log Type Manifold and Free Flowing Riser that will enhance the performance of any motor. This Triple Polished 100% Stainless Steel Exhaust will brighten any covered engine compartment. Retire those old worn out aluminum log manifolds and risers. Feel the excitement and be the first at the lake to show off your new Bassett Log Manifold & Riser Exhaust System.
Design Highlights: 100% Stainless Steel 3/8" Thick Flange Mandrel Bent Triple Polished Heli-Arc Welded 3 Year Limited Warranty Complete with Header Bolts and Gaskets
Water Jacketed Log Manifold & Risers
Stay on the Lake with Power to Spare
The Bassett Stage 1 Silencer Muffler is a state of the art design developed by Bassett Performance with years of testing to quiet high performance motors in order to meet the new stringent sound regulations. The Bassett Stage 1 Silencer is designed to keep you on the lake without loss of major horsepower. It reduces noise to the low 80 decibels with idle at 800 RPMs in motors up to 600 horsepower with a loss in horsepower of only 3% - 5%. Made from 100% Stainless Steel. Easy installation; just attach one bolt and you are ready to go. So, Stay on the Lake with Power to Spare.
Design Highlights: 100% Stainless Steel Super Quiet Decibel: Stock to 600 hp in low 80 decibels with idle at 800 RPMs Works with higher horsepower motors, but decibel levels may increase Perforated Tube with Internal Baffle, Packed with Stainless Steel Wool Mufflers are 3-7/8" O.D. x 10-1/2" long Fits in all Bassett Headers Fits in 4" and belled 5-1/8" x 16 gauge Collectors Does not fit on 4" x .083" 14 gauge wall tubing Installation Kit included; two bolts, two spacers, two washers, and two nuts to attach both mufflers Two Mufflers per set
Stage 1 Silencer Muffler
Stay on the Lake and Look Hot with Power to Spare
The Stage 1 Silencer Muffler Tip incorporates the Stage 1 Silencer Muffler in a 100% Stainless Steel Thru-Transom Tip. If you need to be super quiet with your thru-transom exhaust, then this is the muffler for you. No need to spend thousands of dollars for built-in muffler tips.
The Bassett Stage 1 Silencer Muffler is a state of the art design developed by Bassett Performance with years of testing to quiet high performance motors in order to meet the new stringent sound regulations. The Bassett Stage 1 Silencer has a built in surge protector and is designed to keep you on the lake without loss of major horsepower. It reduces noise to the low 80 decibels with idle at 800 RPMs in motors up to 600 horsepower with a loss in horsepower of only 3% - 5%. Made from 100% Stainless Steel. Easy installation. So, Stay on the Lake and Look Hot with Power to Spare.
Design Highlights: 100% Stainless Steel Built-In Surge Protector Super Quiet Decibel: Stock to 600 hp in low 80 decibels with idle at 800 RPMs Works with higher horsepower motors, but decibel levels may increase Perforated Tube with Internal Baffle, Packed with Stainless Steel Wool Two Mufflers and Tips per set
Stage 1 Silencer Muffler Tip
Add Beauty and Quality under the hood of your car. Are you looking for a header that backs up the Quality, Time, Money, and Workmanship you've put into your car? Then the Bassett Racing Performance Block Hugger Hot Rod Header is for you.
Top Quality and Workmanship created this 100% Stainless Steel Header with its High Luster Polish, Laser Cut Flanges, One Piece Mandrel Bent Tubes, Custom Formed Collectors, and our Exclusive High Temp Ring Band Head Tube Clamp System. It's guaranteed not to leak! Also included are our 90 degree Head Tube, Stainless Steel Header Bolts, and High Temp Gaskets.
All this doesn't happen in an hour. It takes time to make these babies. The Bassett LS1 Header is Tig Welded, High Luster Polished, and Quality Inspected before delivery. Just like you do with your car, we pay attention to Detail and Fit. And, yes, this header is made top to bottom right here in the USA.
You might pay a bit more to get all this, but this header is a Piece of Art! It will add Beauty and Quality under the hood of your car. And it's sure to please any judge. With the Bassett Block Hugger Hot Rod Header, you get the same sharp looks you want and deserve under the hood that you expect and demand on the outside of your car.
Two Styles to Choose From: Chevy Block Hugger Hot Rod Headers * 1. Standard Small Block * 2. LS1 Aluminum 350 Small Block
Design Highlights * 100% Stainless Steel * 1-5/8" Diameter Tube * 2-1/2 Collector and Head Tube * Custom 3/8" Thick Flange * Tight Fit Block Hugger Style * 4 into 1 Collector Racing Look * Swivel Tail Pipe for a Perfect Fit * V-Band Aero Space Connection Guaranteed Not To Leak * Bassett's Own Exclusive High Temp Band Clamp * Includes Header Gaskets and Stainless Steel Header Bolts * High Luster Polish. All Collectors, Tubes, and Flanges are Polished Before and after Welding to Achieve the Bassett High Quality Look * Optional 02 Sensor Fitting
Block Hugger Hot Rod Car Header
Contact Us
Your Boat Header and Boat Racing Parts Specialist |
Bassett Racing Performance Systems 1380 N. McCan Street, Anaheim, California 92806 Phone 800-345-5824 & 714-630-7999 Fax 714-630-3121 Email mail@bassettracing.com
Your Boat Header and Boat Racing Parts Specialist |